Eclipse Etek3 LT Paintball Gun - Urban Dig-E-Cam

• Eclipse Etek3 LT paintball marker
• One Piece Body - FRM is integrated into the body for reliability and robustness
• Deftek Feed - slightly offset to one side to prevent bouncing, breaks and chops
• Smaller Rammer Housing - rear bottom tube is smaller, allowing the gun to be more compact
• Zick Kit - reduces kick and softens initial impact on the ball during loading
• Cure Bolt - bolt is standard, along with a body-contoured rear cut that allows the bolt to blend seamlessly into the marker body; lessens breaks that happen due to the bolt clipping balls in the feed stack
• Direct Mounted Solenoid - molded solenoid minifold mounts the SMC solenoid directly to the marker body, adjacent to the rammer; now just a single hose taking LP air from the LPR to the Minifold, which is filtered for protection from debris
• S3 Inline Regulator - features a self-purging device to ensure the valve chamber is left empty once tank is removed; coil spring construction for quick and simple maintenance with no washer or shim stack to lose or incorrectly assemble
• Adjustable LPR - precise control of LPR pressure without the risk of accidental over-pressurization of solenoid or rammer
• Fully Adjustable Trigger - self-lubricating trigger holder neatly clips into the frame; combined with magnetic trigger return it creates smooth, positive trigger feel; adjustable for fore and aft stop as well as magnetic return strength
• 2-Piece Barrel - 14" 2-piece honed barrel with distinct Eclipse Reverse Threading, making the Etek3 barrel upgradeable with Shaft3 Upgrade pack; 0.693" rear bore is standard
• Break Beam Sensor System - ensures excellence at preventing chopped balls in the breech; when enabled, it will only fire once a ball has loaded into the breech; if BBSS system sees any kind of fault, software automatically overrides and marker continues to fire at a greatly reduced rate
• LED Board - 3 true color indicators; allows easy programming of all the user definable parameters by greatly simplifying the programming process; top LED indicates 10s of units, middle displays 1s and bottom shows 0.1 increments
• Programmable Firing Modes - user definable settings for Dwell, Ball-in-Place, Eyes Off ROF, Cap ROF (uncapped in Semi 1), Debounce, and Firing Mode; has the capability to be set to cover every current tournament regulation
• Soft Grips - follow the same design as Geo and Ego grips; comfortable, slim, grippy and soft
• OOPS - the same On/Off/Purge System (OOPS) as the Ego10; easy to maintain, easy to turn and dumps air from the marker when turned off; mounts to the bottom of the Etek3 frame using robust T-Rail slide system